Enter chinese/english word(s), Taiwan address or math. expression :

可輸入英文單字中文字詞台灣地址計算式 按[Enter]重新輸入
Internet Engineering Task Force (IETF)                        A. Bierman
Request for Comments: 6087                                       Brocade
Category: Informational                                     January 2011
ISSN: 2070-1721

   Guidelines for Authors and Reviewers of YANG Data Model Documents

Abstract

   This memo provides guidelines for authors and reviewers of Standards
   Track specifications containing YANG data model modules.  Applicable
   portions may be used as a basis for reviews of other YANG data model
   documents.  Recommendations and procedures are defined, which are
   intended to increase interoperability and usability of Network
   Configuration Protocol (NETCONF) implementations that utilize YANG
   data model modules.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/RFC 6087.

Copyright Notice

   Copyright (c) 2011 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Bierman                       Informational                     [Page 1]
RFC 6087 Guidelines for YANG Documents January 2011 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1. Requirements Notation . . . . . . . . . . . . . . . . . . 3 2.2. NETCONF Terms . . . . . . . . . . . . . . . . . . . . . . 4 2.3. YANG Terms . . . . . . . . . . . . . . . . . . . . . . . . 4 2.4. Terms . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. General Documentation Guidelines . . . . . . . . . . . . . . . 5 3.1. Module Copyright . . . . . . . . . . . . . . . . . . . . . 5 3.2. Narrative Sections . . . . . . . . . . . . . . . . . . . . 6 3.3. Definitions Section . . . . . . . . . . . . . . . . . . . 6 3.4. Security Considerations Section . . . . . . . . . . . . . 6 3.5. IANA Considerations Section . . . . . . . . . . . . . . . 7 3.5.1. Documents that Create a New Namespace . . . . . . . . 7 3.5.2. Documents that Extend an Existing Namespace . . . . . 8 3.6. Reference Sections . . . . . . . . . . . . . . . . . . . . 8 4. YANG Usage Guidelines . . . . . . . . . . . . . . . . . . . . 8 4.1. Module Naming Conventions . . . . . . . . . . . . . . . . 8 4.2. Identifiers . . . . . . . . . . . . . . . . . . . . . . . 9 4.3. Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.4. Conditional Statements . . . . . . . . . . . . . . . . . . 10 4.5. XPath Usage . . . . . . . . . . . . . . . . . . . . . . . 10 4.6. Lifecycle Management . . . . . . . . . . . . . . . . . . . 11 4.7. Module Header, Meta, and Revision Statements . . . . . . . 12 4.8. Namespace Assignments . . . . . . . . . . . . . . . . . . 13 4.9. Top-Level Data Definitions . . . . . . . . . . . . . . . . 14 4.10. Data Types . . . . . . . . . . . . . . . . . . . . . . . . 14 4.11. Reusable Type Definitions . . . . . . . . . . . . . . . . 15 4.12. Data Definitions . . . . . . . . . . . . . . . . . . . . . 15 4.13. Operation Definitions . . . . . . . . . . . . . . . . . . 17 4.14. Notification Definitions . . . . . . . . . . . . . . . . . 17 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17 6. Security Considerations . . . . . . . . . . . . . . . . . . . 18 6.1. Security Considerations Section Template . . . . . . . . . 19 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 20 8.1. Normative References . . . . . . . . . . . . . . . . . . . 20 8.2. Informative References . . . . . . . . . . . . . . . . . . 21 Appendix A. Module Review Checklist . . . . . . . . . . . . . . . 22 Appendix B. YANG Module Template . . . . . . . . . . . . . . . . 24 Bierman Informational [Page 2]
RFC 6087 Guidelines for YANG Documents January 2011 1. Introduction The standardization of network configuration interfaces for use with the Network Configuration Protocol (NETCONF) [RFC 4741] requires a modular set of data models, which can be reused and extended over time. This document defines a set of usage guidelines for Standards Track documents containing YANG [RFC 6020] data models. YANG is used to define the data structures, protocol operations, and notification content used within a NETCONF server. A server that supports a particular YANG module will support client NETCONF operation requests, as indicated by the specific content defined in the YANG module. This document is similar to the Structure of Management Information version 2 (SMIv2) usage guidelines specification [RFC 4181] in intent and structure. However, since that document was written a decade after SMIv2 modules had been in use, it was published as a 'Best Current Practice' (BCP). This document is not a BCP, but rather an informational reference, intended to promote consistency in documents containing YANG modules. Many YANG constructs are defined as optional to use, such as the description statement. However, in order to maximize interoperability of NETCONF implementations utilizing YANG data models, it is desirable to define a set of usage guidelines that may require a higher level of compliance than the minimum level defined in the YANG specification. In addition, YANG allows constructs such as infinite length identifiers and string values, or top-level mandatory nodes, that a compliant server is not required to support. Only constructs that all servers are required to support can be used in IETF YANG modules. This document defines usage guidelines related to the NETCONF operations layer and NETCONF content layer, as defined in [RFC 4741]. These guidelines are intended to be used by authors and reviewers to improve the readability and interoperability of published YANG data models. 2. Terminology 2.1. Requirements Notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC 2119]. Bierman Informational [Page 3]
RFC 6087 Guidelines for YANG Documents January 2011 RFC 2119 language is used here to express the views of the NETMOD working group regarding content for YANG modules. YANG modules complying with this document will treat the RFC 2119 terminology as if it were describing best current practices. 2.2. NETCONF Terms The following terms are defined in [RFC 4741] and are not redefined here: o capabilities o client o operation o server 2.3. YANG Terms The following terms are defined in [RFC 6020] and are not redefined here: o data node o module o namespace o submodule o version o YANG o YIN Note that the term 'module' may be used as a generic term for a YANG module or submodule. When describing properties that are specific to submodules, the term 'submodule' is used instead. 2.4. Terms The following terms are used throughout this document: published: A stable release of a module or submodule, usually contained in an RFC. Bierman Informational [Page 4]
RFC 6087 Guidelines for YANG Documents January 2011 unpublished: An unstable release of a module or submodule, usually contained in an Internet-Draft. 3. General Documentation Guidelines YANG data model modules under review are likely to be contained in Internet-Drafts. All guidelines for Internet-Draft authors MUST be followed. The RFC Editor provides guidelines for authors of RFCs, which are first published as Internet-Drafts. These guidelines should be followed and are defined in [RFC 2223] and updated in [RFC 5741] and "RFC Document Style" [RFC-STYLE]. The following sections MUST be present in an Internet-Draft containing a module: o Narrative sections o Definitions section o Security Considerations section o IANA Considerations section o References section 3.1. Module Copyright The module description statement MUST contain a reference to the latest approved IETF Trust Copyright statement, which is available online at: http://trustee.ietf.org/license-info/ Each YANG module or submodule contained within an Internet-Draft or RFC is considered to be a code component. The strings '<CODE BEGINS>' and '<CODE ENDS>' MUST be used to identify each code component. The '<CODE BEGINS>' tag SHOULD be followed by a string identifying the file name specified in Section 5.2 of [RFC 6020]. The following example is for the '2010-01-18' revision of the 'ietf-foo' module: Bierman Informational [Page 5]
RFC 6087 Guidelines for YANG Documents January 2011 <CODE BEGINS> file "ietf-foo@2010-01-18.yang" module ietf-foo { // ... revision 2010-01-18 { description "Latest revision"; reference "RFC XXXX"; } // ... } <CODE ENDS> 3.2. Narrative Sections The narrative part MUST include an overview section that describes the scope and field of application of the module(s) defined by the specification and that specifies the relationship (if any) of these modules to other standards, particularly to standards containing other YANG modules. The narrative part SHOULD include one or more sections to briefly describe the structure of the modules defined in the specification. If the module(s) defined by the specification imports definitions from other modules (except for those defined in the YANG [RFC 6020] or YANG Types [RFC 6021] documents), or are always implemented in conjunction with other modules, then those facts MUST be noted in the overview section, as MUST be noted any special interpretations of definitions in other modules. 3.3. Definitions Section This section contains the module(s) defined by the specification. These modules MUST be written using the YANG syntax defined in [RFC 6020]. A YIN syntax version of the module MAY also be present in the document. There MAY also be other types of modules present in the document, such as SMIv2, which are not affected by these guidelines. See Section 4 for guidelines on YANG usage. 3.4. Security Considerations Section Each specification that defines one or more modules MUST contain a section that discusses security considerations relevant to those modules. This section MUST be patterned after the latest approved template (available at http://www.ops.ietf.org/netconf/yang-security-considerations.txt). Bierman Informational [Page 6]
RFC 6087 Guidelines for YANG Documents January 2011 Section 6.1 contains the security considerations template dated 2010-06-16. Authors MUST check the webpage at the URL listed above in case there is a more recent version available. In particular: o Writable data nodes that could be especially disruptive if abused MUST be explicitly listed by name and the associated security risks MUST be explained. o Readable data nodes that contain especially sensitive information or that raise significant privacy concerns MUST be explicitly listed by name and the reasons for the sensitivity/privacy concerns MUST be explained. o Operations (i.e., YANG 'rpc' statements) that are potentially harmful to system behavior or that raise significant privacy concerns MUST be explicitly listed by name and the reasons for the sensitivity/privacy concerns MUST be explained. 3.5. IANA Considerations Section In order to comply with IESG policy as set forth in http://www.ietf.org/id-info/checklist.html, every Internet-Draft that is submitted to the IESG for publication MUST contain an IANA Considerations section. The requirements for this section vary depending on what actions are required of the IANA. If there are no IANA considerations applicable to the document, then the IANA Considerations section stating that there are no actions is removed by the RFC Editor before publication. Refer to the guidelines in [RFC 5226] for more details. 3.5.1. Documents that Create a New Namespace If an Internet-Draft defines a new namespace that is to be administered by the IANA, then the document MUST include an IANA Considerations section that specifies how the namespace is to be administered. Specifically, if any YANG module namespace statement value contained in the document is not already registered with IANA, then a new YANG Namespace registry entry MUST be requested from the IANA. The YANG [RFC 6020] specification includes the procedure for this purpose in its IANA Considerations section. Bierman Informational [Page 7]
RFC 6087 Guidelines for YANG Documents January 2011 3.5.2. Documents that Extend an Existing Namespace It is possible to extend an existing namespace using a YANG submodule that belongs to an existing module already administered by IANA. In this case, the document containing the main module MUST be updated to use the latest revision of the submodule. 3.6. Reference Sections For every import or include statement that appears in a module contained in the specification, which identifies a module in a separate document, a corresponding normative reference to that document MUST appear in the Normative References section. The reference MUST correspond to the specific module version actually used within the specification. For every normative reference statement that appears in a module contained in the specification, which identifies a separate document, a corresponding normative reference to that document SHOULD appear in the Normative References section. The reference SHOULD correspond to the specific document version actually used within the specification. If the reference statement identifies an informative reference, which identifies a separate document, a corresponding informative reference to that document MAY appear in the Informative References section. 4. YANG Usage Guidelines In general, modules in IETF Standards Track specifications MUST comply with all syntactic and semantic requirements of YANG [RFC 6020]. The guidelines in this section are intended to supplement the YANG specification, which is intended to define a minimum set of conformance requirements. In order to promote interoperability and establish a set of practices based on previous experience, the following sections establish usage guidelines for specific YANG constructs. Only guidelines that clarify or restrict the minimum conformance requirements are included here. 4.1. Module Naming Conventions Modules contained in Standards Track documents SHOULD be named according to the guidelines in the IANA Considerations section of [RFC 6020]. Bierman Informational [Page 8]
RFC 6087 Guidelines for YANG Documents January 2011 A distinctive word or acronym (e.g., protocol name or working group acronym) SHOULD be used in the module name. If new definitions are being defined to extend one or more existing modules, then the same word or acronym should be reused, instead of creating a new one. All published module names MUST be unique. For a YANG module published in an RFC, this uniqueness is guaranteed by IANA. For unpublished modules, the authors need to check that no other work in progress is using the same module name. Once a module name is published, it MUST NOT be reused, even if the RFC containing the module is reclassified to 'Historic' status. 4.2. Identifiers Identifiers for all YANG identifiers in published modules MUST be between 1 and 64 characters in length. These include any construct specified as an 'identifier-arg-str' token in the ABNF in Section 12 of [RFC 6020]. 4.3. Defaults In general, it is suggested that substatements containing very common default values SHOULD NOT be present. The following substatements are commonly used with the default value, which would make the module difficult to read if used everywhere they are allowed. +---------------+---------------+ | Statement | Default Value | +---------------+---------------+ | config | true | | | | | mandatory | false | | | | | max-elements | unbounded | | | | | min-elements | 0 | | | | | ordered-by | system | | | | | status | current | | | | | yin-element | false | +---------------+---------------+ Bierman Informational [Page 9]
RFC 6087 Guidelines for YANG Documents January 2011 4.4. Conditional Statements A module may be conceptually partitioned in several ways, using the 'if-feature' and/or 'when' statements. Data model designers need to carefully consider all modularity aspects, including the use of YANG conditional statements. If a data definition is optional, depending on server support for a NETCONF protocol capability, then a YANG 'feature' statement SHOULD be defined to indicate that the NETCONF capability is supported within the data model. If any notification data, or any data definition, for a non- configuration data node is not mandatory, then the server may or may not be required to return an instance of this data node. If any conditional requirements exist for returning the data node in a notification payload or retrieval request, they MUST be documented somewhere. For example, a 'when' or 'if-feature' statement could apply to the data node, or the conditional requirements could be explained in a 'description' statement within the data node or one of its ancestors (if any). 4.5. XPath Usage This section describes guidelines for using the XML Path Language [W3C.REC-xpath-19991116] (XPath) within YANG modules. The 'attribute' and 'namespace' axes are not supported in YANG, and MAY be empty in a NETCONF server implementation. The 'position' and 'last' functions SHOULD NOT be used. This applies to implicit use of the 'position' function as well (e.g., '//chapter[42]'). A server is only required to maintain the relative XML document order of all instances of a particular user-ordered list or leaf-list. The 'position' and 'last' functions MAY be used if they are evaluated in a context where the context node is a user- ordered 'list' or 'leaf-list'. The 'preceding', and 'following' axes SHOULD NOT be used. These constructs rely on XML document order within a NETCONF server configuration database, which may not be supported consistently or produce reliable results across implementations. Predicate expressions based on static node properties (e.g., element name or value, 'ancestor' or 'descendant' axes) SHOULD be used instead. The 'preceding' and 'following' axes MAY be used if document order is not relevant to the outcome of the expression (e.g., check for global uniqueness of a parameter value). Bierman Informational [Page 10]
RFC 6087 Guidelines for YANG Documents January 2011 The 'preceding-sibling' and 'following-sibling' axes SHOULD NOT used. A server is only required to maintain the relative XML document order of all instances of a particular user-ordered list or leaf-list. The 'preceding-sibling' and 'following-sibling' axes MAY be used if they are evaluated in a context where the context node is a user-ordered 'list' or 'leaf-list'. Data nodes that use the 'int64' and 'uint64' built-in type SHOULD NOT be used within numeric expressions. There are boundary conditions in which the translation from the YANG 64-bit type to an XPath number can cause incorrect results. Specifically, an XPath 'double' precision floating point number cannot represent very large positive or negative 64-bit numbers because it only provides a total precision of 53 bits. The 'int64' and 'uint64' data types MAY be used in numeric expressions if the value can be represented with no more than 53 bits of precision. Data modelers need to be careful not to confuse the YANG value space and the XPath value space. The data types are not the same in both, and conversion between YANG and XPath data types SHOULD be considered carefully. Explicit XPath data type conversions MAY be used (e.g., 'string', 'boolean', or 'number' functions), instead of implicit XPath data type conversions. 4.6. Lifecycle Management The status statement MUST be present if its value is 'deprecated' or 'obsolete'. The module or submodule name MUST NOT be changed, once the document containing the module or submodule is published. The module namespace URI value MUST NOT be changed, once the document containing the module is published. The revision-date substatement within the imports statement SHOULD be present if any groupings are used from the external module. The revision-date substatement within the include statement SHOULD be present if any groupings are used from the external submodule. If submodules are used, then the document containing the main module MUST be updated so that the main module revision date is equal or more recent than the revision date of any submodule that is (directly or indirectly) included by the main module. Bierman Informational [Page 11]
RFC 6087 Guidelines for YANG Documents January 2011 4.7. Module Header, Meta, and Revision Statements For published modules, the namespace MUST be a globally unique URI, as defined in [RFC 3986]. This value is usually assigned by the IANA. The organization statement MUST be present. If the module is contained in a document intended for Standards Track status, then the organization SHOULD be the IETF working group chartered to write the document. The contact statement MUST be present. If the module is contained in a document intended for Standards Track status, then the working group web and mailing information MUST be present, and the main document author or editor contact information SHOULD be present. If additional authors or editors exist, their contact information MAY be present. In addition, the Area Director and other contact information MAY be present. The description statement MUST be present. The appropriate IETF Trust Copyright text MUST be present, as described in Section 3.1. If the module relies on information contained in other documents, which are not the same documents implied by the import statements present in the module, then these documents MUST be identified in the reference statement. A revision statement MUST be present for each published version of the module. The revision statement MUST have a reference substatement. It MUST identify the published document that contains the module. Modules are often extracted from their original documents, and it is useful for developers and operators to know how to find the original source document in a consistent manner. The revision statement MAY have a description substatement. Each new revision MUST include a revision date that is higher than any other revision date in the module. The revision date does not need to be updated if the module contents do not change in the new document revision. It is acceptable to reuse the same revision statement within unpublished versions (i.e., Internet-Drafts), but the revision date MUST be updated to a higher value each time the Internet-Draft is re- posted. Bierman Informational [Page 12]
RFC 6087 Guidelines for YANG Documents January 2011 4.8. Namespace Assignments It is RECOMMENDED that only valid YANG modules be included in documents, whether or not they are published yet. This allows: o the module to compile correctly instead of generating disruptive fatal errors. o early implementors to use the modules without picking a random value for the XML namespace. o early interoperability testing since independent implementations will use the same XML namespace value. Until a URI is assigned by the IANA, a proposed namespace URI MUST be provided for the namespace statement in a YANG module. A value SHOULD be selected that is not likely to collide with other YANG namespaces. Standard module names, prefixes, and URI strings already listed in the YANG Module Registry MUST NOT be used. A standard namespace statement value SHOULD have the following form: <URN prefix string>:<module-name> The following URN prefix string SHOULD be used for published and unpublished YANG modules: urn:ietf:params:xml:ns:yang: The following example URNs would be valid temporary namespace statement values for Standards Track modules: urn:ietf:params:xml:ns:yang:ietf-netconf-partial-lock urn:ietf:params:xml:ns:yang:ietf-netconf-state urn:ietf:params:xml:ns:yang:ietf-netconf Note that a different URN prefix string SHOULD be used for non- Standards-Track modules. The string SHOULD be selected according to the guidelines in [RFC 6020]. The following examples of non-Standards-Track modules are only suggestions. There are no guidelines for this type of URN in this document: Bierman Informational [Page 13]
RFC 6087 Guidelines for YANG Documents January 2011 http://example.com/ns/example-interfaces http://example.com/ns/example-system 4.9. Top-Level Data Definitions There SHOULD only be one top-level data node defined in each YANG module, if any data nodes are defined at all. The top-level data organization SHOULD be considered carefully, in advance. Data model designers need to consider how the functionality for a given protocol or protocol family will grow over time. The names and data organization SHOULD reflect persistent information, such as the name of a protocol. The name of the working group SHOULD NOT be used because this may change over time. A mandatory database data definition is defined as a node that a client must provide for the database to be valid. The server is not required to provide a value. Top-level database data definitions MUST NOT be mandatory. If a mandatory node appears at the top level, it will immediately cause the database to be invalid. This can occur when the server boots or when a module is loaded dynamically at runtime. 4.10. Data Types Selection of an appropriate data type (i.e., built-in type, existing derived type, or new derived type) is very subjective, and therefore few requirements can be specified on that subject. Data model designers SHOULD use the most appropriate built-in data type for the particular application. If extensibility of enumerated values is required, then the 'identityref' data type SHOULD be used instead of an enumeration or other built-in type. For string data types, if a machine-readable pattern can be defined for the desired semantics, then one or more pattern statements SHOULD be present. For string data types, if the length of the string is required to be bounded in all implementations, then a length statement MUST be present. Bierman Informational [Page 14]
RFC 6087 Guidelines for YANG Documents January 2011 For numeric data types, if the values allowed by the intended semantics are different than those allowed by the unbounded intrinsic data type (e.g., 'int32'), then a range statement SHOULD be present. The signed numeric data types (i.e., 'int8', 'int16', 'int32', and 'int64') SHOULD NOT be used unless negative values are allowed for the desired semantics. For 'enumeration' or 'bits' data types, the semantics for each 'enum' or 'bit' SHOULD be documented. A separate description statement (within each 'enum' or 'bit' statement) SHOULD be present. 4.11. Reusable Type Definitions If an appropriate derived type exists in any standard module, such as [RFC 6021], then it SHOULD be used instead of defining a new derived type. If an appropriate units identifier can be associated with the desired semantics, then a units statement SHOULD be present. If an appropriate default value can be associated with the desired semantics, then a default statement SHOULD be present. If a significant number of derived types are defined, and it is anticipated that these data types will be reused by multiple modules, then these derived types SHOULD be contained in a separate module or submodule, to allow easier reuse without unnecessary coupling. The description statement MUST be present. If the type definition semantics are defined in an external document (other than another YANG module indicated by an import statement), then the reference statement MUST be present. 4.12. Data Definitions The description statement MUST be present in the following YANG statements: o anyxml o augment o choice o container Bierman Informational [Page 15]
RFC 6087 Guidelines for YANG Documents January 2011 o extension o feature o grouping o identity o leaf o leaf-list o list o notification o rpc o typedef If the data definition semantics are defined in an external document, (other than another YANG module indicated by an import statement), then a reference statement MUST be present. The 'anyxml' construct may be useful to represent an HTML banner containing markup elements, such as '' and '', and MAY be used in such cases. However, this construct SHOULD NOT be used if other YANG data node types can be used instead to represent the desired syntax and semantics. If there are referential integrity constraints associated with the desired semantics that can be represented with XPath, then one or more 'must' statements SHOULD be present. For list and leaf-list data definitions, if the number of possible instances is required to be bounded for all implementations, then the max-elements statements SHOULD be present. If any 'must' or 'when' statements are used within the data definition, then the data definition description statement SHOULD describe the purpose of each one. Bierman Informational [Page 16]
RFC 6087 Guidelines for YANG Documents January 2011 4.13. Operation Definitions If the operation semantics are defined in an external document (other than another YANG module indicated by an import statement), then a reference statement MUST be present. If the operation impacts system behavior in some way, it SHOULD be mentioned in the description statement. If the operation is potentially harmful to system behavior in some way, it MUST be mentioned in the Security Considerations section of the document. 4.14. Notification Definitions The description statement MUST be present. If the notification semantics are defined in an external document (other than another YANG module indicated by an import statement), then a reference statement MUST be present. 5. IANA Considerations This document registers one URI in the IETF XML registry [RFC 3688]. The following registration has been made: URI: urn:ietf:params:xml:ns:yang:ietf-template Registrant Contact: The NETMOD WG of the IETF. XML: N/A, the requested URI is an XML namespace. Per this document, the following assignment has been made in the YANG Module Names Registry for the YANG module template in Appendix B. +---------------+-------------------------------------------+ | Field | Value | +---------------+-------------------------------------------+ | Name | ietf-template | | | | | Namespace | urn:ietf:params:xml:ns:yang:ietf-template | | | | | Prefix | temp | | | | | Reference | RFC 6087 | +---------------+-------------------------------------------+ Bierman Informational [Page 17]
RFC 6087 Guidelines for YANG Documents January 2011 6. Security Considerations This document defines documentation guidelines for NETCONF content defined with the YANG data modeling language. The guidelines for how to write a Security Considerations section for a YANG module are defined in the online document http://www.ops.ietf.org/netconf/yang-security-considerations.txt This document does not introduce any new or increased security risks into the management system. The following section contains the security considerations template dated 2010-06-16. Be sure to check the webpage at the URL listed above in case there is a more recent version available. Each specification that defines one or more YANG modules MUST contain a section that discusses security considerations relevant to those modules. This section MUST be patterned after the latest approved template (available at http://www.ops.ietf.org/netconf/yang-security-considerations.txt). In particular, writable data nodes that could be especially disruptive if abused MUST be explicitly listed by name and the associated security risks MUST be spelled out. Similarly, readable data nodes that contain especially sensitive information or that raise significant privacy concerns MUST be explicitly listed by name and the reasons for the sensitivity/privacy concerns MUST be explained. Further, if new RPC operations have been defined, then the security considerations of each new RPC operation MUST be explained. Bierman Informational [Page 18]
RFC 6087 Guidelines for YANG Documents January 2011 6.1. Security Considerations Section Template X. Security Considerations The YANG module defined in this memo is designed to be accessed via the NETCONF protocol [RFC 4741]. The lowest NETCONF layer is the secure transport layer and the mandatory-to-implement secure transport is SSH [RFC 4742]. -- if you have any writable data nodes (those are all the -- "config true" nodes, and remember, that is the default) -- describe their specific sensitivity or vulnerability. There are a number of data nodes defined in this YANG module which are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability: <list subtrees and data nodes and state why they are sensitive> -- for all YANG modules you must evaluate whether any readable data -- nodes (those are all the "config false" nodes, but also all other -- nodes, because they can also be read via operations like get or -- get-config) are sensitive or vulnerable (for instance, if they -- might reveal customer information or violate personal privacy -- laws such as those of the European Union if exposed to -- unauthorized parties) Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability: <list subtrees and data nodes and state why they are sensitive> -- if your YANG module has defined any rpc operations -- describe their specific sensitivity or vulnerability. Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability: <list RPC operations and state why they are sensitive> Bierman Informational [Page 19]
RFC 6087 Guidelines for YANG Documents January 2011 7. Acknowledgments The structure and contents of this document are adapted from Guidelines for MIB Documents [RFC 4181], by C. M. Heard. The working group thanks Martin Bjorklund and Juergen Schoenwaelder for their extensive reviews and contributions to this document. 8. References 8.1. Normative References [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC 2223] Postel, J. and J. Reynolds, "Instructions to RFC Authors", RFC 2223, October 1997. [RFC 3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. [RFC 3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC 4741] Enns, R., "NETCONF Configuration Protocol", RFC 4741, December 2006. [RFC 5378] Bradner, S. and J. Contreras, "Rights Contributors Provide to the IETF Trust", BCP 78, RFC 5378, November 2008. [RFC 5741] Daigle, L., Kolkman, O., and IAB, "RFC Streams, Headers, and Boilerplates", RFC 5741, December 2009. [W3C.REC-xpath-19991116] DeRose, S. and J. Clark, "XML Path Language (XPath) Version 1.0", World Wide Web Consortium Recommendation REC-xpath-19991116, November 1999, <http://www.w3.org/TR/1999/REC-xpath-19991116>. [RFC 6020] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, October 2010. [RFC 6021] Schoenwaelder, J., "Common YANG Data Types", RFC 6021, October 2010. Bierman Informational [Page 20]
RFC 6087 Guidelines for YANG Documents January 2011 8.2. Informative References [RFC 4181] Heard, C., "Guidelines for Authors and Reviewers of MIB Documents", BCP 111, RFC 4181, September 2005. [RFC 5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008. [RFC-STYLE] Braden, R., Ginoza, S., and A. Hagens, "RFC Document Style", September 2009, <http://www.rfc-editor.org/rfc-style-guide/rfc-style>. Bierman Informational [Page 21]
RFC 6087 Guidelines for YANG Documents January 2011 Appendix A. Module Review Checklist This section is adapted from RFC 4181. The purpose of a YANG module review is to review the YANG module both for technical correctness and for adherence to IETF documentation requirements. The following checklist may be helpful when reviewing an Internet-Draft: 1. I-D Boilerplate -- verify that the draft contains the required Internet-Draft boilerplate (see http://www.ietf.org/id-info/guidelines.html), including the appropriate statement to permit publication as an RFC, and that I-D boilerplate does not contain references or section numbers. 2. Abstract -- verify that the abstract does not contain references, that it does not have a section number, and that its content follows the guidelines in http://www.ietf.org/id-info/guidelines.html. 3. Copyright Notice -- verify that the draft has the appropriate text regarding the rights that document contributers provide to the IETF Trust [RFC 5378]. Verify that it contains the full IETF Trust copyright notice at the beginning of the document. The IETF Trust Legal Provisions (TLP) can be found at: http://trustee.ietf.org/license-info/ 4. Security Considerations section -- verify that the draft uses the latest approved template from the OPS area website (http:// www.ops.ietf.org/netconf/yang-security-considerations.txt) and that the guidelines therein have been followed. 5. IANA Considerations section -- this section must always be present. For each module within the document, ensure that the IANA Considerations section contains entries for the following IANA registries: XML Namespace Registry: Register the YANG module namespace. YANG Module Registry: Register the YANG module name, prefix, namespace, and RFC number, according to the rules specified in [RFC 6020]. 6. References -- verify that the references are properly divided between normative and informative references, that RFC 2119 is included as a normative reference if the terminology defined therein is used in the document, that all references required by Bierman Informational [Page 22]
RFC 6087 Guidelines for YANG Documents January 2011 the boilerplate are present, that all YANG modules containing imported items are cited as normative references, and that all citations point to the most current RFCs unless there is a valid reason to do otherwise (for example, it is OK to include an informative reference to a previous version of a specification to help explain a feature included for backward compatibility). Be sure citations for all imported modules are present somewhere in the document text (outside the YANG module). 7. License -- verify that the draft contains the Simplified BSD License in each YANG module or submodule. Some guidelines related to this requirement are described in Section 3.1. Make sure that the correct year is used in all copyright dates. Use the approved text from the latest Trust Legal Provisions (TLP) document, which can be found at: http://trustee.ietf.org/license-info/ 8. Other Issues -- check for any issues mentioned in http://www.ietf.org/id-info/checklist.html that are not covered elsewhere. 9. Technical Content -- review the actual technical content for compliance with the guidelines in this document. The use of a YANG module compiler is recommended when checking for syntax errors. A list of freely available tools and other information can be found at: http://trac.tools.ietf.org/wg/netconf/trac/wiki Checking for correct syntax, however, is only part of the job. It is just as important to actually read the YANG module document from the point of view of a potential implementor. It is particularly important to check that description statements are sufficiently clear and unambiguous to allow interoperable implementations to be created. Bierman Informational [Page 23]
RFC 6087 Guidelines for YANG Documents January 2011 Appendix B. YANG Module Template <CODE BEGINS> file "ietf-template@2010-05-18.yang" module ietf-template { // replace this string with a unique namespace URN value namespace "urn:ietf:params:xml:ns:yang:ietf-template"; // replace this string, and try to pick a unique prefix prefix "temp"; // import statements here: e.g., // import ietf-yang-types { prefix yang; } // import ietf-inet-types { prefix inet; } // identify the IETF working group if applicable organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; // update this contact statement with your info contact "WG Web: <http://tools.ietf.org/wg/your-wg-name/> WG List: <mailto:your-wg-name@ietf.org> WG Chair: your-WG-chair <mailto:your-WG-chair@example.com> Editor: your-name <mailto:your-email@example.com>"; // replace the first sentence in this description statement. // replace the copyright notice with the most recent // version, if it has been updated since the publication // of this document description "This module defines a template for other YANG modules. Copyright (c) <insert year> IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Bierman Informational [Page 24]
RFC 6087 Guidelines for YANG Documents January 2011 Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this YANG module is part of RFC XXXX; see the RFC itself for full legal notices."; // RFC Ed.: replace XXXX with actual RFC number and remove this note reference "RFC XXXX"; // RFC Ed.: remove this note // Note: extracted from RFC 6087 // replace '2010-05-18' with the module publication date // The format is (year-month-day) revision "2010-05-18" { description "Initial version"; } // extension statements // feature statements // identity statements // typedef statements // grouping statements // data definition statements // augment statements // rpc statements // notification statements // DO NOT put deviation statements in a published module } <CODE ENDS> Bierman Informational [Page 25]
RFC 6087 Guidelines for YANG Documents January 2011 Author's Address Andy Bierman Brocade EMail: andy.bierman@brocade.com Bierman Informational [Page 26]